--- Artefact Data --- Folder : All the deteriorated artefacts were photographed before sample collection or analysis, and the pictures can be found in this folder. For deteriorated samples (S), the spine, the cover (b), and the title page (c) of the book when available are given. For reference samples (R) the spool or sample book the sample originates from is shown. Sample Data.xlsx : Information about each deteriorated and reference sample (such as age, colour, etc) and the Electronic Appendix Inventory Sheet. Electronic Appendix Inventory Sheet : Ticked boxes for if the photos a-c are present --- Photos of Samples --- Folder : Photographs of the samples removed from the artefacts above, in the form they were taken for analysis. --- FTIR --- FTIR Results Folder : Contains all the csv format data obtained from the IR machine measurements of the samples. FTIR Setup Folder : Photographs of the sample placed in the IR machine to make a measurement. Electronic Appendix Inventory Sheet : Ticked boxes for if data is present and if setup is present in above folders FTIR Processed Data/Tannin assignments S.xlsx : FTIR detections of tannin types in deteriorated samples FTIR Processed Data/FTIRPeakRatios1030vs1080.xlsx : Measuring deterioration of samples by comparing ratios of collagen and tannin FTIR peaks FTIR Processed Data/FTIR1030vs1080RBS.pdf and FTIR1030vs1080RTS.pdf : As above but for the BS and TS of reference samples. --- SEM --- SEM Results Folder : Images of samples. Typically a small zoom factor (x30 or x45 for example) shows the whole sample. Files with A are annotations of these which show where larger zoom factor images were taken from, which are then shown in separate images. SEM-EDX Folder : Spectra taken of SEM images with names corresponding to those in SEM folder. One image showing where spectra were taken, and then one file per spectrum. Electronic Appendix Inventory Sheet : List of samples with SEM taken, all magnifications they are taken at, and below those how many spectra at that magnification are present. SEM Processed Data/SEM Elemental Composition.xlsx : Summary of SEM-EDS spectra, what elements are in each sample and how much. SEM Samples Folder : photographs of the samples used for SEM, in boxes or on pucks ---- ICP ---- ICP Results: Contains all of the ICP-OES and ICP-MS data obtained from the respective machines. ICP Processed Data: Contains all of the ICP-OES and ICP-MS data processed as described in the thesis. ICP Setup: Contains pictures taken while preparing samples. ---- XPS ---- XPS Results: Contains all of the XPS data obtained from the machine. XPS Processed Data: Contains the combined and processed XPS data, extracted % atomic concentrations of detected elements and the visualised graphs for the wide scans and C 1s for each sample. XPS Samples: Contains photographs of the samples used for XPS. ---- Loose .py files ---- Code written to process the ICP and FTIR data. --- Abbreviations in file names --- RRS - red rot deteriorated sample RRR - red rot reference sample BS - bottom side TS - top side CS - cross section L - left R - right M - middle E - edge F - fibres S - strip C - clump P - powder FP - filter paper